| Current-controlled Switch |
The resistance between the node1(+) and node2(-) depends on the current through the Vsource. The general form of the instance is the following:
| W<name> <node1(+)> <node2(-)> <Vsource name> <model name> [ON|OFF] |
name
Is the name of the component and the initial letter W identifies the Current-controlled Switch.
node1(+), node2(-)
Are the nodes between which the switch terminals are connected.
Vsource name
The resistance between the node1(+) and node2(-) depends on the current through the Vsource.
model name
Is the model name.
ON/OFF
The (optional) initial condition specification.
W1 1 2 VCTRL WMOD
Current-controlled Switch Model
Current-controlled Switch Instance Parameters