2-to-1 Multiplexer

The M2_1 multiplexer chooses one data bit from two sources (D1 or D0) under the control of the select input (S0). The output (O) reflects the state of the selected data input. When Low, S0 selects D0 and when High, S0 selects D1.

Parameters

Parameter Description Units Default
DELAY Propagation delay. s DGTDELAY
IN_MODE Inputs mode.   IN
OUT_MODE Outputs mode.   OUT
IOMODEL The name of an I/O model, which describes the device‚Äôs loading and driving characteristics.   DGTDEFIOMODEL
POWER_NODE Digital power node name. Is the node used by the interface subcircuits which connect analog nodes to digital nodes.   $G_DPWR
GROUND_NODE Digital ground node name. Is the node used by the interface subcircuits which connect analog nodes to digital nodes.   $G_DGND