8-to-1 Multiplexer with Active-Low Enable and Complementary Outputs
When the active-Low enable (G) is Low, the X74_151 multiplexer chooses one data bit from eight sources (D7 – D0) under control of the select inputs A, B, and C. The output (Y) reflects the state of the selected input, and the active-Low output (W) reflects the inverse of the selected input as shown in the truth table. When G is High, the Y output is Low, and the W output is High.
Parameters
| Parameter | Description | Units | Default |
|---|---|---|---|
| DELAY | Propagation delay. | s | DGTDELAY |
| IN_MODE | Inputs mode. | IN | |
| OUT_MODE | Outputs mode. | OUT | |
| IOMODEL | The name of an I/O model, which describes the device’s loading and driving characteristics. | DGTDEFIOMODEL | |
| POWER_NODE | Digital power node name. Is the node used by the interface subcircuits which connect analog nodes to digital nodes. | $G_DPWR | |
| GROUND_NODE | Digital ground node name. Is the node used by the interface subcircuits which connect analog nodes to digital nodes. | $G_DGND |