2-to-1 Multiplexer with D0 and D1 Inverted
The M2_1B2 multiplexer chooses one data bit from two sources (D1 or D0) under the control of select input (S0). When S0 is Low, the output (O) reflects the inverted state of D0. When S0 is High, O reflects the inverted state of D1.
Parameters
Parameter | Description | Units | Default |
---|---|---|---|
DELAY | Propagation delay. | s | DGTDELAY |
IN_MODE | Inputs mode. | IN | |
OUT_MODE | Outputs mode. | OUT | |
IOMODEL | The name of an I/O model, which describes the device’s loading and driving characteristics. | DGTDEFIOMODEL | |
POWER_NODE | Digital power node name. Is the node used by the interface subcircuits which connect analog nodes to digital nodes. | $G_DPWR | |
GROUND_NODE | Digital ground node name. Is the node used by the interface subcircuits which connect analog nodes to digital nodes. | $G_DGND |