Dual 4-to-1 Multiplexer with Active-Low Enables and Common Select Input
When the active-Low enable inputs G1 and G2 are Low, the data output Y1, reflects the data input chosen by select inputs A and B from data inputs I1C3 – I1C0. The data output Y2 reflects the data input chosen by select inputs A and B from data inputs I2C3 – I2C0. When G1 or G2 is High, the corresponding output, Y1 or Y2 respectively, is Low.
Parameters
| Parameter | Description | Units | Default |
|---|---|---|---|
| DELAY | Propagation delay. | s | DGTDELAY |
| IN_MODE | Inputs mode. | IN | |
| OUT_MODE | Outputs mode. | OUT | |
| IOMODEL | The name of an I/O model, which describes the device’s loading and driving characteristics. | DGTDEFIOMODEL | |
| POWER_NODE | Digital power node name. Is the node used by the interface subcircuits which connect analog nodes to digital nodes. | $G_DPWR | |
| GROUND_NODE | Digital ground node name. Is the node used by the interface subcircuits which connect analog nodes to digital nodes. | $G_DGND |