Quadruple 2-to-1 Multiplexer with Common Select and Active-Low Enable
When the active-Low enable input (G) is Low, a 4-bit word is selected from one of two sources (A3 – A0 or B3 – B0) under the control of the select input (S) and is reflected on the four outputs (Y4 – Y1). When S is Low, the outputs reflect A3 – A0; when S is High, the outputs reflect B3 – B0. When G is High, the outputs are Low.
Parameters
| Parameter | Description | Units | Default |
|---|---|---|---|
| DELAY | Propagation delay. | s | DGTDELAY |
| IN_MODE | Inputs mode. | IN | |
| OUT_MODE | Outputs mode. | OUT | |
| IOMODEL | The name of an I/O model, which describes the device’s loading and driving characteristics. | DGTDEFIOMODEL | |
| POWER_NODE | Digital power node name. Is the node used by the interface subcircuits which connect analog nodes to digital nodes. | $G_DPWR | |
| GROUND_NODE | Digital ground node name. Is the node used by the interface subcircuits which connect analog nodes to digital nodes. | $G_DGND |