Quadruple 2-to-1 Multiplexer with Common Select, Active-Low Enable, and Active-Low Outputs
When the active-Low enable (G) is Low, a 4-bit word is selected from one of two sources (A3 – A0 or B3 – B0) under the control of the common select input (S). The inverse of the selected word is reflected on the active-Low outputs (Y4 – Y1). When S is Low, A3 – A0 appear inverted on the outputs; when S is High, B3 – B0 appear inverted on the outputs. When G is High, the outputs are High.
Parameters
| Parameter | Description | Units | Default |
|---|---|---|---|
| DELAY | Propagation delay. | s | DGTDELAY |
| IN_MODE | Inputs mode. | IN | |
| OUT_MODE | Outputs mode. | OUT | |
| IOMODEL | The name of an I/O model, which describes the device’s loading and driving characteristics. | DGTDEFIOMODEL | |
| POWER_NODE | Digital power node name. Is the node used by the interface subcircuits which connect analog nodes to digital nodes. | $G_DPWR | |
| GROUND_NODE | Digital ground node name. Is the node used by the interface subcircuits which connect analog nodes to digital nodes. | $G_DGND |