Toggle Flip-Flop with Toggle Enable and Asynchronous Preset
When the asynchronous preset (PRE) input is High, all other inputs are ignored and output Q is set High. When toggle enable input (T) is High and PRE is Low, output Q toggles, or changes state, during the Low-to-High clock (C) transition.
Parameters
| Parameter | Description | Units | Default |
|---|---|---|---|
| IC | Output initial state. | LOW | |
| CLKTPLH | Delay from clock to out high. | s | DGTDELAY |
| CLKTPHL | Delay from clock to out low. | s | DGTDELAY |
| PRETPLH | Delay from preset to out high. | s | DGTDELAY |
| PRETPHL | Delay from preset to out low. | s | DGTDELAY |
| IN_MODE | Inputs mode. | IN | |
| OUT_MODE | Outputs mode. | OUT | |
| IOMODEL | The name of an I/O model, which describes the device’s loading and driving characteristics. | DGTDEFIOMODEL | |
| POWER_NODE | Digital power node name. Is the node used by the interface subcircuits which connect analog nodes to digital nodes. | $G_DPWR | |
| GROUND_NODE | Digital ground node name. Is the node used by the interface subcircuits which connect analog nodes to digital nodes. | $G_DGND |