This component simulates the operation of a garage door control system.
Ports
| Pin | Description |
|---|---|
| COM | Common terminal. Connected to the ground. |
| FLASH | A positive voltage, greater than or equal to 5 volts, on this terminal causes the lamp to flash. |
| CLOSE | A positive voltage, greater than or equal to 5 volts, on this terminal activates the motor for closing the door. |
| OPEN | A positive voltage, greater than or equal to 5 volts, on this terminal activates the motor for opening the door. |
| OPENED | End of stroke in opening. This terminal is connected to the COM terminal by a resistor. The resistance value is RESON when the door is completely open otherwise the resistance value is RESOFF. |
| CLOSED | End of stroke in closing. This terminal is connected to the COM terminal by a resistor. The resistance value is RESON when the door is completely closed, otherwise the resistance value is RESOFF. |
| DANGER | Output of the infrared (IR) beam detector. This terminal is connected to the COM terminal by a resistor. The resistance value is RESON when the IR beam is broken otherwise the resistance value is RESOFF. |
Parameters
| Parameter | Description | Units | Default |
|---|---|---|---|
| RESON | On resistance. | Ohms | 1mΩ |
| RESOFF | Off resistance. | Ohms | 1GΩ |
| WORKTIME | Time for opening. In seconds. The value is referred to the real time and not to the simulation time. | s | 10s |