Use the constant source to power your circuit.
Parameters
| Parameter | Description | Units | |
|---|---|---|---|
| Value | Amplitude of the source. This value is used only if no value is specified for the parameter DC. | V or A | |
| DC | Amplitude of the source. The amplitude can also be specified in the VALUE field of the symbol. If both DC and VALUE are specified, DC takes precedence. | V or A | |
| ACMAG | AC Magnitude of small signal voltage or current. Set this if you plan to do a small signal AC analysis based on this source. | V or A | |
| ACPHASE | AC Phase of small signal voltage or current. Set this if you plan to do a small signal AC analysis based on this source. If phase is omitted, a value of zero is assumed. | degrees | |
| DISTOF1 | Set this if you plan to do a distortion analysis based on this source. Specify the amplitude and phase using space as separator. If phase is omitted, a value of zero is assumed. | ||
| DISTOF2 | Set this if you plan to do a distortion analysis based on this source. Specify the amplitude and phase using space as separator. If phase is omitted, a value of zero is assumed. | ||