These symbols represent generic resistor types.
Parameters
| Parameter | Description | Units | Default | |
|---|---|---|---|---|
| Value | Is the resistance and may be positive or negative but not zero. | Ω | ||
| MODEL | Resistor model. The model must be specified only when you want to assign a value to one or both of the temperature coefficients TC1 and TC2. This parameter is optional. | |||
| TC | Must be specified only when you want to assign a value to one or both of the temperature coefficients TC1 (coefficient of first order) and TC2 (coefficient of second order). If you specify both values,separate them with a comma. This parameter is optional. | Ω/°C Ω/°C² |
0.0 0.0 |
|
| TEMP | Specifies the temperature at which the component operates. This value, if specified, takes precedence over the analysis temperature. This parameter is optional. | °C | ||
| POWER | Maximum power dissipated by the resistor. This parameter is optional | W | ||
| Tolerance | Resistor tolerance. See Tolerance for the syntax of this parameter. This parameter is optional. |