The general form of the instance is the following:

G<name> <node1(+)> <node2(-)> <ctrl_node1(+)> <ctrl_node2(-)> <value>



Is the name of the component and the initial letter G identifies the VCCS.

nodo1(+) nodo2(-)

Are the positive and negative nodes, respectively. Current flow is from the positive node, through the source, to the negative node.

ctrl_node1(+), ctrl_node2(-)

Are the positive and negative controlling nodes, respectively.


Is the transconductance (in mhos). Gout = value * Vctrl.


G1 1 0 5 0 0.1m

See also

Linear Voltage-Controlled Voltage Sources
Linear Current-Controlled Current Sources
Linear Current-Controlled Voltage Sources
Non-linear Dependent Polynomial Sources
PSpice Non-linear Dependent Sources
Voltage-Controlled Current Sources Instance Parameters