The general form of the instance is the following:

H<name> <node1(+)> <node2(-)> <Vsource> <value>



Is the name of the component and the initial letter H identifies the CCVS.

node1(+) node2(-)

Are the positive and negative nodes, respectively.


Is the name of a voltage source through which the controlling current flows. The direction of positive controlling current flow is from the positive node, through the source, to the negative node of Vsource.


Is the transresistance (in ohms). Hout = value * I(Vsource).


H1 10 20 VCON 0.001

See also

Linear Voltage-Controlled Voltage Sources
Linear Current-Controlled Current Sources
Linear Voltage-Controlled Current Sources
Non-linear Dependent Polynomial Sources
PSpice Non-linear Dependent Sources
Current-Controlled Voltage Sources Instance Parameters