Output parameters are those additional parameters which are available for many types of instances for the output of operating point and debugging information. These parameters are specified as @device[keyword] and must be explicitly saved using the .SAVE command.

Prefix Device
B Non-linear dependent voltage or current source
C Capacitor
D Diode
E Linear and non-linear voltage-controlled voltage source
F Linear and non-linear current-controlled current source
G Linear voltage-controlled current source
H Linear current-controlled voltage source
I Independent current source
J JFET
K Coupled inductor
L Inductor
M MOSFET
O Lossy transmission line
Q Bipolar Junction Transistor (BJT)
R Resistor
S Voltage-controlled switch
T Lossless transmission line
U Uniform distributed RC transmission lines
V Independent voltage source
W Current-controlled switch
Z MESFET